Heat Transfer Design Considerations for Refractory Linings with Steel Anchors
by Greg Palmer, B.E. Ph.D. and Tony Howes, B.E. Ph.D.
School of Engineering, The University of Queensland, St. Lucia 4072, Australia

Testing the Integrity of Refractory Lined Vessels using the NDT Technique P-Response
by Greg Palmer, B.E. Ph.D.
Palmer Technologies Pty Ltd, Brisbane, Australia

Petrographic examination of refractory damage to a burner pipe
Greg Palmer
Process Superintendent, Queensland Cement Ltd, Queensland, Australia

Design and Efficiency Aspects of Rotary Dryers
by Greg Palmer, B.E. Ph.D. and Tony Howes*, B.E. Ph.D.
Palmer Technologies Pty Ltd, Brisbane, Australia

Heat Transfer in Rotary Kilns
by Greg Palmer, B.E. Ph.D. and Tony Howes, B.E. Ph.D.
Palmer Technologies Pty Ltd, Brisbane, Australia

Refractory Concrete Reinforced with Stainless Steel Fiber
Greg Palmer, Principal Engineer, Palmer Technologies, Brisbane – PO Box 1513 Coorparoo DC Queensland 4151

Testing the Integrity of Refractory Lined Vessels using the NDT Technique P-Response
Greg Palmer Palmer Technologies Pty Ltd., Coorparoo DC/Australien

The Calculation of Transient and Steady State Heat Transfer in Refractory Linings under various Conditions
by Greg Palmer, Palmer Technologies Pty Ltd and Associate Professor Tony Howes, School of Engineering, The University of Queensland, Australia

Selecting Steel Anchors for Monolithic Refractory Linings
by Greg Palmer, CPEng, PhD, Palmer Technologies Pty Ltd, Australia
Matthew Smillie, PhD, MPT Solutions Ltd, New Zealand

The Behaviour of Monolithic Refractory and its Importance for the Design of Refractory Structures
by Greg Palmer and Renee Ellis, Palmer Technologies Pty Ltd